ruvgtqoiur

Moderator: Angel

Post Reply
smc4434
Newbie
Newbie
Posts: 1
Joined: Sat Apr 09, 2011 4:21 pm

Samsung DLP TV burnt out 3 lamps in 3 months!?!?!

Post by smc4434 » Sat Apr 09, 2011 4:27 pm

My Samsung DLP TV has burnt out 3 lamps in 3 months. I got an original replacement lamp all 3 times from samsungparts.com. Every time I install a new lamp it works fine for about a month and then the lamp blows again. I have opened the tv up and cleaned out all of the dust and made sure the fans were working properly. Could there be something else causing these bulbs to go bad???

User avatar
grayfox
Jedi Master
Jedi Master
Posts: 1049
Joined: Sat Jun 13, 2009 9:40 pm
Location: Sunny San Diego!
Contact:

Re: Samsung DLP TV burnt out 3 lamps in 3 months!?!?!

Post by grayfox » Tue Apr 12, 2011 5:13 pm

Hello,
wow this sounds expensive! :shock: The ballast is what generates power to the lamp ;) , I am assuming there is a malfunction with this part... :geek:
were all three lamps physically burnt when removed? :?:
ImageUnit Foxhound

grodayarera
Contributor
Contributor
Posts: 11
Joined: Tue Jun 07, 2011 5:38 am
Location: Austria
Contact:

Samsung DLP TV burnt out 3 lamps in 3 months

Post by grodayarera » Thu Jun 16, 2011 6:07 pm

I have a Sony VPD-MX10 and the lamp burnt out. I bought a replacement lamp from Advanced Lamps and within 3 weeks the replacement burn out.

Any ideas why this would happen so quickly?

User avatar
grayfox
Jedi Master
Jedi Master
Posts: 1049
Joined: Sat Jun 13, 2009 9:40 pm
Location: Sunny San Diego!
Contact:

Re: Samsung DLP TV burnt out 3 lamps in 3 months!?!?!

Post by grayfox » Thu Jun 16, 2011 10:35 pm

Hello,
It is really rare that this would happen, is the lamp physically damaged/defective??? or is it not an OEM brand lamp (Philips, Osram, etc) because if its generic it most probably did fail...
ImageUnit Foxhound

Samsungtech
Likes to Post
Likes to Post
Posts: 21
Joined: Wed Sep 14, 2011 12:59 am

Re: Samsung DLP TV burnt out 3 lamps in 3 months!?!?!

Post by Samsungtech » Thu Sep 15, 2011 3:55 am

There is a known issue with some of the DLP series burning lamps, the solution recommended by Samsung is to replace SMPS, Ballast along with the lamp.
this typically applies to all DLPs that use the BP44-01001a or BP44-01002a Power Supply.

User avatar
grayfox
Jedi Master
Jedi Master
Posts: 1049
Joined: Sat Jun 13, 2009 9:40 pm
Location: Sunny San Diego!
Contact:

Re: Samsung DLP TV burnt out 3 lamps in 3 months!?!?!

Post by grayfox » Thu Sep 15, 2011 4:05 pm

hello samsungtech,

by "SMPS" et all, you mean this problem can only be fixed completely by changing the power supply, ballast and the lamp??? thank you!
ImageUnit Foxhound

Samsungtech
Likes to Post
Likes to Post
Posts: 21
Joined: Wed Sep 14, 2011 12:59 am

Re: Samsung DLP TV burnt out 3 lamps in 3 months!?!?!

Post by Samsungtech » Fri Sep 16, 2011 1:55 am

Sorry SMPS just means switch mode power supply which is what most of Samsung TVs use. The power supply PCB is what I was referring to.

User avatar
grayfox
Jedi Master
Jedi Master
Posts: 1049
Joined: Sat Jun 13, 2009 9:40 pm
Location: Sunny San Diego!
Contact:

Re: Samsung DLP TV burnt out 3 lamps in 3 months!?!?!

Post by grayfox » Fri Sep 16, 2011 6:01 pm

yup that was noted, I was asking if you meant changing all three at the same time ! that sucks
ImageUnit Foxhound

AlanfUp
TV Wizard
TV Wizard
Posts: 3471
Joined: Sat Apr 11, 2020 4:53 am

ruvgtqoiur

Post by AlanfUp » Mon Oct 23, 2023 3:16 pm


Post Reply

Return to “Akai DLP Discussion”