dlbmfycx

Moderator: Angel

Post Reply
Bdubs78
Newbie
Newbie
Posts: 2
Joined: Thu Oct 28, 2010 5:47 pm

Samsung HLT5076SX/XAA

Post by Bdubs78 » Thu Oct 28, 2010 5:52 pm

When I turn the TV on, the LAMP LED flashes, then the set powers down, and then tries again to turn on.
It sounds like the TV is trying to start up, but after a few seconds, it powers down and attemps to start up again.

I ordered a new Lamp which is on the way, but if anyone has any suggestions, or knows how to verify the lamp is actually bad please let me know!

Any advice or suggestions are greatly appreciated!

Thanks

User avatar
grayfox
Jedi Master
Jedi Master
Posts: 1049
Joined: Sat Jun 13, 2009 9:40 pm
Location: Sunny San Diego!
Contact:

Re: Samsung HLT5076SX/XAA

Post by grayfox » Tue Mar 01, 2011 7:02 pm

hello!
When a lamp goes bad, it is usually shattered, burnt in the middle glass bubble (on the inside filament) or fogged in any spot on that same bubble or the front glass face. :mrgreen:
A good lamp should be crystal clear! :geek:
Hope this helps ;)
ImageUnit Foxhound

Wimlok
TV Wizard
TV Wizard
Posts: 481
Joined: Fri Apr 24, 2020 10:59 pm

dlbmfycx

Post by Wimlok » Wed Mar 15, 2023 12:35 am


Post Reply

Return to “Akai DLP Discussion”