
omuuxiqr
Moderator: Angel
-
- Contributor
- Posts: 3
- Joined: Fri Feb 11, 2011 11:47 pm
samsung hl-s5086wx/xaa picyure problem
Hi all. Ive had my samsung dlp since april 0f 2007 it gave me some problems in 2010 so in march i bought a new lamp and replaced it but the black lines were still there its so bad you cant see most of the picture. i need help i dont want to buy parts i dont need. thanks 

- Attachments
-
- IMAG0138.jpg (139.64 KiB) Viewed 2432 times
-
- hls5086wxxaa1.jpg (100.8 KiB) Viewed 2432 times
- grayfox
- Jedi Master
- Posts: 1049
- Joined: Sat Jun 13, 2009 9:40 pm
- Location: Sunny San Diego!
- Contact:
Re: samsung hl-s5086wx/xaa picyure problem
this can be caused by the video signal output by the DMD board or a video board, hard to diagnose, but you can try to find out which of the the digital video board /analog input board is bad if you test digital versus analog inputs (i.e. HDMI versus coaxial) and if the analog coaxial shows disruption but the HDMI does not, you know it is an issue with the digital video board...
hope this helps
hope this helps

-
- Contributor
- Posts: 3
- Joined: Fri Feb 11, 2011 11:47 pm
Re: samsung hl-s5086wx/xaa picyure problem
Ok I get the same thing when its hook to coaxial cable and when its hooked up to my Xbox 360. Sorry but I'm a novice when it comes to this.
-
- Contributor
- Posts: 3
- Joined: Fri Feb 11, 2011 11:47 pm
Re: samsung hl-s5086wx/xaa picyure problem
Ok so I ran the test this morning and both pictures had the same result. Is there something that controls both that's causing this failure.
- grayfox
- Jedi Master
- Posts: 1049
- Joined: Sat Jun 13, 2009 9:40 pm
- Location: Sunny San Diego!
- Contact:
Re: samsung hl-s5086wx/xaa picyure problem
Yes sir the reason we try this out is because everything runs through an analog input board, and if all else fails this can possibly be your DMD board.
