I found also a lampdriver for the 200W, should replace it too ?
ojiyopdz
Moderator: Angel
replace philips LC4242 150W uhp with a 200W lamp
Hi, I wonder to know if is possible to replace tha original 150W lamp with a 200W.
I found also a lampdriver for the 200W, should replace it too ?
I found also a lampdriver for the 200W, should replace it too ?
- Attachments
-
- philips 200 c.JPG (10.7 KiB) Viewed 5235 times
Re: replace philips LC4242 150W uhp with a 200W lamp
It really depends on the type of projector you have. The 150W is obviously a lot lower than the 200W. If you also replace the lamp driver, you're definitely going to have a compatible lamp and ballast, but was the projector made for use with 50W higher equipment? It might burn or melt something.
--
Eddie
Eddie
Re: replace philips LC4242 150W uhp with a 200W lamp
Eddie thanks for your answer.
The Projector is a Philips LC4242 and is a big one so the ventilation should be oversized.
Another dubt is: for first should I replace the original 150W lamp with the 200W keeping the original lampdriver or should I replace both directly ?
I post the lampdrivers picture too (original and new one).
Regards.
The Projector is a Philips LC4242 and is a big one so the ventilation should be oversized.
Another dubt is: for first should I replace the original 150W lamp with the 200W keeping the original lampdriver or should I replace both directly ?
I post the lampdrivers picture too (original and new one).
Regards.
- Attachments
-
- IMAG0371.JPG (66.31 KiB) Viewed 5227 times
-
- 200W_lampdriver.jpg (28.53 KiB) Viewed 5227 times
