runiozub

Moderator: Angel

Post Reply
ecko51
Newbie
Newbie
Posts: 2
Joined: Wed Dec 30, 2009 2:16 pm

HLN437W No component signals after color wheel rep

Post by ecko51 » Wed Dec 30, 2009 2:43 pm

Hi,
I just replaced my color wheel for my HLN437W DLP and the picture is fine through S-video, and Composite (red/white/yellow)

Now I can't get a picture through the Component inputs. My model has 3 sets, I have tried all 3 and it cannot recieve a signal. It does recognise that something is connected to it through the source selection though.


Any help or suggestions would br greatly appreciated.
Thanks.

ecko51
Newbie
Newbie
Posts: 2
Joined: Wed Dec 30, 2009 2:16 pm

Re: HLN437W No component signals after color wheel rep

Post by ecko51 » Thu Dec 31, 2009 3:09 am

Problem solved:
The 2 components I was trying to hook up were set to 1080i and would not show up until I hooked them back up to my New Samsung LCD and reduced the input setting to 1080p.
(xbox 360 & a older Sony dvd theater in a box)

Well at least I found this site, It has alot of info.

Thanks again.

Jason1976
TV Repair Ninja
TV Repair Ninja
Posts: 286
Joined: Sat Aug 15, 2009 6:34 pm
Location: Harrisburg PA

Re: HLN437W No component signals after color wheel rep

Post by Jason1976 » Sun Jan 03, 2010 11:35 pm

Glad you found out what was wrong. I had no idea on this one. I have the same tv in my bedroom. I picked it up for free. It had issues of turning off at random times when I picked it up. It just had bad solder joint issues in the power supply.

I was lost why you lost signals after color wheel replacement.

Wimlok
TV Wizard
TV Wizard
Posts: 481
Joined: Fri Apr 24, 2020 10:59 pm

runiozub

Post by Wimlok » Thu Dec 29, 2022 11:56 pm


Post Reply

Return to “Akai DLP Discussion”