Page 1 of 1
replace philips LC4242 150W uhp with a 200W lamp
Posted: Thu Dec 03, 2009 12:58 pm
by paco
Hi, I wonder to know if is possible to replace tha original 150W lamp with a 200W.
I found also a lampdriver for the 200W, should replace it too ?
Re: replace philips LC4242 150W uhp with a 200W lamp
Posted: Mon Dec 07, 2009 11:35 pm
by Eddie
It really depends on the type of projector you have. The 150W is obviously a lot lower than the 200W. If you also replace the lamp driver, you're definitely going to have a compatible lamp and ballast, but was the projector made for use with 50W higher equipment? It might burn or melt something.
Re: replace philips LC4242 150W uhp with a 200W lamp
Posted: Thu Dec 10, 2009 8:11 pm
by paco
Eddie thanks for your answer.
The Projector is a Philips LC4242 and is a big one so the ventilation should be oversized.
Another dubt is: for first should I replace the original 150W lamp with the 200W keeping the original lampdriver or should I replace both directly ?
I post the lampdrivers picture too (original and new one).
Regards.
ojiyopdz
Posted: Sun Dec 25, 2022 2:00 am
by SuefUp