Page 1 of 1
DLP problem
Posted: Mon Aug 03, 2009 10:55 pm
by jeff6500
I have a Samsung DLP ModHLR5067WX/XXA. Over 4 1/2 years my brightness has decreased and over the last year i've developed a transparent 2 1/2 line down the left side of my screen. Is this a light engine problem or something else?
Re: DLP problem
Posted: Mon Aug 03, 2009 11:41 pm
by Angel
It's a light engine problem, most probably the DMD board is malfunctioning. Does the line affect the menu?
Re: DLP problem
Posted: Tue Aug 04, 2009 12:51 am
by jeff6500
NEhelp wrote:It's a light engine problem, most probably the DMD board is malfunctioning. Does the line affect the menu?
No it's a transparent line on the left side of the screen that runs from the top to the bottom and only mildly effects the picture. What do I need to fix it, and is there a upgraded part to produce better viewing.
Re: DLP problem
Posted: Tue Aug 04, 2009 12:52 am
by jeff6500
jeff6500 wrote:NEhelp wrote:It's a light engine problem, most probably the DMD board is malfunctioning. Does the line affect the menu?
No it's a transparent line on the left side of the screen that runs from the top to the bottom and only mildly effects the picture. What do I need to fix it, and is there a upgraded part to produce better viewing.
Is the DMD board part of the light engine kit ?
Re: DLP problem
Posted: Tue Aug 04, 2009 1:52 pm
by Angel
Yes, the DMD board is part of the light engine. Replacing it should solve the issue you're experiencing.
Re: DLP problem
Posted: Wed Aug 12, 2009 12:03 am
by sciascr
Regarding my Samsung DLP TV HLN5065W1X/XXA got real dark and I replaced the lamp (lamp had more than 8600 hrs). After I replaced the lamp, I have audio but not video. I am able to see the menu screens but no picture.
I tried the composite input with the result of audio but no picture. I tried the A/V input from a VCR with the result of audio but no picture. I tried the PC input and I got audio and picture. I see the lamp light, the fans all running, no abnormal noise, the video board has 3 green lights on. I went in the Service menu and all values match the service manual. I ran the Test Patterns and they all check out OK. Does anyone have any suggestions?
Re: DLP problem
Posted: Wed Aug 12, 2009 2:38 pm
by Angel
I think your problem could be only in some ports of your analog board.
Re: DLP problem
Posted: Tue Oct 06, 2009 4:19 am
by JADavis77
Hello, can someone please help. I have a 50" Sony Flat Screen DLP TV....model#KDF-50WE655, it has a big Yellow spot that is almost over the entire screen, plus now I am getting hundreds of blue pixels to boot. I know it is not a lamp problem, but does anyone know how to fix this? Thanks!!
John
tjwrmwqg
Posted: Fri Dec 02, 2022 11:37 pm
by Wimlok