Page 1 of 1

samsung HLS 5687w missing small strip of picture

Posted: Tue Jun 09, 2009 5:10 pm
by acdelco
in 16x9 mode the upper rt corner to the lower rt corner the picture is missing almost like its bending in. on top rt its about 1/2 inch wide and fades out 6 inches from lower rt and then the picture is normal.

in 4x3 mode both top upper corners bend in slightly for about 5 inches.

on an analog set i could adjust a problem like this. tv's being digital i think i have an expensive problem.

any ideas??

Re: samsung HLS 5687w missing small strip of picture

Posted: Wed Jun 10, 2009 9:19 pm
by Jake
i think is the digital video board

Not 100% sure....but it sound like it.

check on DM .___. maybe you can find there the board that you need. ._.

atxmuxnh

Posted: Wed Nov 16, 2022 9:21 am
by BoofUp