omuuxiqr

Moderator: Angel

Post Reply
dmoore85335
Contributor
Contributor
Posts: 3
Joined: Fri Feb 11, 2011 11:47 pm

samsung hl-s5086wx/xaa picyure problem

Post by dmoore85335 » Fri Feb 11, 2011 11:57 pm

Hi all. Ive had my samsung dlp since april 0f 2007 it gave me some problems in 2010 so in march i bought a new lamp and replaced it but the black lines were still there its so bad you cant see most of the picture. i need help i dont want to buy parts i dont need. thanks :?:
Attachments
IMAG0138.jpg
IMAG0138.jpg (139.64 KiB) Viewed 2171 times
hls5086wxxaa1.jpg
hls5086wxxaa1.jpg (100.8 KiB) Viewed 2171 times

User avatar
grayfox
Jedi Master
Jedi Master
Posts: 1049
Joined: Sat Jun 13, 2009 9:40 pm
Location: Sunny San Diego!
Contact:

Re: samsung hl-s5086wx/xaa picyure problem

Post by grayfox » Sat Feb 12, 2011 12:38 am

this can be caused by the video signal output by the DMD board or a video board, hard to diagnose, but you can try to find out which of the the digital video board /analog input board is bad if you test digital versus analog inputs (i.e. HDMI versus coaxial) and if the analog coaxial shows disruption but the HDMI does not, you know it is an issue with the digital video board...
hope this helps
ImageUnit Foxhound

dmoore85335
Contributor
Contributor
Posts: 3
Joined: Fri Feb 11, 2011 11:47 pm

Re: samsung hl-s5086wx/xaa picyure problem

Post by dmoore85335 » Sat Feb 12, 2011 3:21 am

Ok I get the same thing when its hook to coaxial cable and when its hooked up to my Xbox 360. Sorry but I'm a novice when it comes to this.

dmoore85335
Contributor
Contributor
Posts: 3
Joined: Fri Feb 11, 2011 11:47 pm

Re: samsung hl-s5086wx/xaa picyure problem

Post by dmoore85335 » Sat Feb 12, 2011 5:39 pm

Ok so I ran the test this morning and both pictures had the same result. Is there something that controls both that's causing this failure.

User avatar
grayfox
Jedi Master
Jedi Master
Posts: 1049
Joined: Sat Jun 13, 2009 9:40 pm
Location: Sunny San Diego!
Contact:

Re: samsung hl-s5086wx/xaa picyure problem

Post by grayfox » Sun Feb 13, 2011 9:23 pm

Yes sir the reason we try this out is because everything runs through an analog input board, and if all else fails this can possibly be your DMD board.
ImageUnit Foxhound

JackfUp
TV Wizard
TV Wizard
Posts: 2287
Joined: Sun May 03, 2020 7:16 am

omuuxiqr

Post by JackfUp » Sun May 07, 2023 7:52 pm


Post Reply

Return to “Akai DLP Discussion”