Hello,
I just replaced my lamp and now need to reset the timer. I've tried all the tricks that was mentioned in these forums...yet no avail.
I tried:
a)On power...hold vol down on tv and play (no split on remote) on remote together...no success.
b)Power tv on...hit return to get rid of message asking to reset lamp timer...then hold Vol down and play remote button...no success.
c) Hit menu button on tv and play button on tv ... no success.
d)turn the volume up....then down...when it hit 0 on volume...hit play on remote...no success.
why can't panasonic just have the exact instructions on tv...they manage to put the error message there...booo.
and why are there multiple ways to do this...weird.
pls..help..thnks!
Hoovinc
bqcfuvkk
Moderator: Angel
-
grayfox
- Jedi Master
- Posts: 1049
- Joined: Sat Jun 13, 2009 9:40 pm
- Location: Sunny San Diego!
- Contact:
Re: Panasonic- 52LCX16 Timer Reset
hello,
normally i would have suggested what you just mentioned! but heres another option, tell me if it works!
(note* you are to hold the + and 0 at the same time!)
http://www.fixya.com/support/r4533398-p ... imer_reset
hope this helps
normally i would have suggested what you just mentioned! but heres another option, tell me if it works!
(note* you are to hold the + and 0 at the same time!)
http://www.fixya.com/support/r4533398-p ... imer_reset
hope this helps
Unit Foxhound
Re: Panasonic- 52LCX16 Timer Reset
hoovinc wrote:Hello,
I just replaced my lamp and now need to reset the timer. I've tried all the tricks that was mentioned in these forums...yet no avail.
I tried:
a)On power...hold vol down on tv and play (no split on remote) on remote together...no success.
b)Power tv on...hit return to get rid of message asking to reset lamp timer...then hold Vol down and play remote button...no success.
c) Hit menu button on tv and play button on tv ... no success.
d)turn the volume up....then down...when it hit 0 on volume...hit play on remote...no success.
why can't panasonic just have the exact instructions on tv...they manage to put the error message there...booo.
and why are there multiple ways to do this...weird.
pls..help..thnks!
Hoovinc
Another thing you can try, is to do a Hard reset.... by when you have that msg, take the lamp out and ut it back in..... After that make sure the lamp door is closed properly. And disconnect the TV from the wall for at least 2hrs.
Change is the only constant, we must become the change we want to see.
-
grayfox
- Jedi Master
- Posts: 1049
- Joined: Sat Jun 13, 2009 9:40 pm
- Location: Sunny San Diego!
- Contact:
Re: Panasonic- 52LCX16 Timer Reset
it can also be done by taking out the lamp and leaving the TV unplugged for 24 hrs. just to make sure the timer and the TV is reset. ;)
Unit Foxhound