monlkxmxhx

Moderator: Angel

Post Reply
aegjim
Contributor
Contributor
Posts: 5
Joined: Wed Dec 01, 2010 7:26 pm

WD-52725

Post by aegjim » Wed Dec 01, 2010 7:44 pm

I justed pulled my TV out of storage; after several months of fustrating shut downs with tempature/air flow warnings and finally the red lamp indicator comming on. I ordered a new lamp and installed it turned on the TV and it powers up, no funny sounds. I can see light from the lamp and it shuts off after 3 seconds and the red lamp indicator comes back on. I called the lamp supplier and they suggested it maybe the ballast so I pulled it out last night and it appears to look fine no blown capacitors? Before I order a ballast I read a few discussions regarding the tempature sensor problems could this be shuting down my lamp?

User avatar
grayfox
Jedi Master
Jedi Master
Posts: 1049
Joined: Sat Jun 13, 2009 9:40 pm
Location: Sunny San Diego!
Contact:

Re: WD-52725

Post by grayfox » Wed Dec 01, 2010 10:58 pm

Hello aegjim,
Yes temperature sensors can be one of the reasons your new lamp is not igniting. You can find pictures of what this looks like here
http://www.discount-merchant.com/Search ... 725%20temp
ImageUnit Foxhound

aegjim
Contributor
Contributor
Posts: 5
Joined: Wed Dec 01, 2010 7:26 pm

Re: WD-52725

Post by aegjim » Thu Dec 02, 2010 6:21 pm

I pulled the back off and blew out the dust, reseated the lamp. Turned it on and off a few times and a faint menu image came up; I hooked up a DVD player and the image came in wavy and sound was ok. I turned off TV and checked RCA connections and turned it back on; no image and sound again; I can't get the image back tried a few times; lamp ignites and turns off after 3 seconds red lamp indicator light comes on. No clicking noises or weird noise form the color wheel just the fan noise. I pulled the ballast out and it visually looks good; I am planning on pulling the power supply to visually inspect.

AmyfUp
TV Wizard
TV Wizard
Posts: 457
Joined: Tue May 05, 2020 8:34 am

monlkxmxhx

Post by AmyfUp » Sun Mar 19, 2023 5:24 am


Post Reply

Return to “Akai DLP Discussion”