ymyjtbfkm

Moderator: Angel

Post Reply
jmcclain7
Contributor
Contributor
Posts: 6
Joined: Sat Jun 20, 2009 12:54 pm

Verticle semetrical lines across the screen

Post by jmcclain7 » Sat Jun 20, 2009 1:06 pm

I have a 4 year old 63 inch Samsung DLP. The lamp has been replaced once about a year ago. When you turn the TV on everything is fine until the projection lamp warms up usually in about a minute. At that time Several White verticle lines appear across the screen at semetricle distance. The line are about 3 inches wide and are about 3 inchs apart. the lines themselves are made up of tiny white dots that you can partialy seen through. Should I try to call a repairman or is this something I can trubleshot and fix myself? Help??????????

Sincerely Joe McClain
Gilbert, Arizona

User avatar
Angel
Site Admin
Site Admin
Posts: 446
Joined: Sat Apr 04, 2009 1:52 am

Re: Verticle semetrical lines across the screen

Post by Angel » Mon Jun 22, 2009 3:20 pm

hi Joe.

The problem you have is due to a DMD failure. My recommendation is to replace the DMD board. However to be on the safe side, display the TV menu, if the lines appear on the menu too then go ahead with the replacement, if not then get back to us and we'll continue troubleshooting.

Hope this helps.
The best "Do It Yourself" site for all types of Displays!

jmcclain7
Contributor
Contributor
Posts: 6
Joined: Sat Jun 20, 2009 12:54 pm

Re: Verticle semetrical lines across the screen

Post by jmcclain7 » Mon Jun 22, 2009 3:28 pm

Do you know approximately how much a DMD Board will cost?

User avatar
Angel
Site Admin
Site Admin
Posts: 446
Joined: Sat Apr 04, 2009 1:52 am

Re: Verticle semetrical lines across the screen

Post by Angel » Mon Jun 22, 2009 3:34 pm

The best "Do It Yourself" site for all types of Displays!

jmcclain7
Contributor
Contributor
Posts: 6
Joined: Sat Jun 20, 2009 12:54 pm

Re: Verticle semetrical lines across the screen

Post by jmcclain7 » Mon Jun 22, 2009 3:44 pm

How hard is it to replace? Can I do it myself or am I asking for trouble to try?

User avatar
Angel
Site Admin
Site Admin
Posts: 446
Joined: Sat Apr 04, 2009 1:52 am

Re: Verticle semetrical lines across the screen

Post by Angel » Mon Jun 22, 2009 3:58 pm

Not a big deal if you're a handy person. Just need to remove screws and take some parts out of the TV.

Check this out: color wheel replacement guide, you can follow those steps until you have the light engine apart, then instead of replacing the color wheel replace the DMD board.

Hope this helps.
The best "Do It Yourself" site for all types of Displays!

jmcclain7
Contributor
Contributor
Posts: 6
Joined: Sat Jun 20, 2009 12:54 pm

Re: Verticle semetrical lines across the screen

Post by jmcclain7 » Mon Jun 22, 2009 4:07 pm

Thanks! Wish me luck!

User avatar
Angel
Site Admin
Site Admin
Posts: 446
Joined: Sat Apr 04, 2009 1:52 am

Re: Verticle semetrical lines across the screen

Post by Angel » Mon Jun 22, 2009 4:15 pm

May the Force be with you Joe ;)
The best "Do It Yourself" site for all types of Displays!

jmcclain7
Contributor
Contributor
Posts: 6
Joined: Sat Jun 20, 2009 12:54 pm

Re: Verticle semetrical lines across the screen

Post by jmcclain7 » Mon Jun 22, 2009 4:48 pm

Live and Prosper! 8-)

LisafUp
TV Wizard
TV Wizard
Posts: 476
Joined: Sun Apr 12, 2020 9:56 pm

ymyjtbfkm

Post by LisafUp » Fri Nov 18, 2022 10:09 pm


Post Reply

Return to “Akai DLP Discussion”